• Windows Installer Error Messages

    Error Codes These error codes are returned by the Windows Installer functions MsiExec.exe and InstMsi.exe. Note that any error in Winerror.h (such as ERROR_INVALID_DATA, included here) can be returned as well. Note  The error codes ERROR_SUCCESS, ERROR_SUCCESS_REBOOT_INITIATED, and ERROR_SUCCESS_REBOOT_REQUIRED are indicative of success. If ERROR_SUCCESS_REBOOT_REQUIRED is returned, the installation completed successfully but a reboot is… Read More »

    Written by 0 Comment
  • Using HP CAE to collect user information Part 1

    You can use HP Client Automation Enterprise to local user accounts information and to be displayed as part of the built-in reports in HP Reporting Manager. You can assign WBEM_USER_GROUP “WBEM Scan for User/Group “ under Audit domain to computer or OU to get this data collected. Then notify computers for Audit

    Written by 0 Comment
    Uncategorized
  • Install HP Performance Manager license

    To install license to OVPM you can use the steps below cd %ovinstalldir%bin ovpm license a new text window is open for controlling license and you will get message like license expired type gui to launch Autopass for OVPM Select Install/restore License Click Browse to locate the license file Click view content Click Install Close… Read More »

    Written by 0 Comment
    Uncategorized
  • How to use WBEMTEST to get WMI data level 1

    Launch wbemtest from command prompet or RUN Here is the interface to locate WMI classes attributes or instances you have to connect with account with sufficient privilege (note: all users has privilege to WMI but depend of type of action you want to execute which may require administrator priv.) press on connect then type which… Read More »

    Written by 0 Comment
    Uncategorized
  • VERITAS Cluster Service Quick reference

    This quick reference give you a quick view about the commands that you can use to deal with Veritas Cluster Service using different commands like hagrp, hares, haagent and hauser Basic VCS Commands SERVICE GROUPS AND RESOURCE OPERATIONS BASIC CONFIGURATION OPERATIONS STATUS AND VERIFICATION COMMUNICATION ADMINISTERATION http://eval.veritas.com/downloads/van/vcs_quickref.pdf

    Written by 0 Comment
    Uncategorized
  • Allow OVPI to send emails through Exchange 2007

    Remember one thing that there is two tasks you should do 1- create Receive Connector to accept OVPI connection 2-PowerShell Command to assign Permission for anonymous to relay from OVPI To troubleshoot this  Create dummy schedule and run the reports inside and you can open %dpipe_home%logpiweb.log If you got  Unable to relay To use the… Read More »

    Written by 0 Comment
    Uncategorized
  • Load MIB file in NNMi

    to load mib file in NNMi change to OV_bin dir /opt/OV/bin nnmincidentcfg.ovpl –u username –p password –loadMib <mib file location> nnmloadmib.ovpl –u system –p password -resynch

    Written by 0 Comment
  • find text in the result of command

    Some times when we execute commands we got lot of data that we do not want so if you want to search a result on command, you can pipe your command to find command like the below cmd /c "net start | %SystemRoot%system32find /i "Reporter Service"

    Written by 0 Comment
  • How to install SiteScope 10 License

    Stop Sitescope service Look for the following lines and check their values in master.config located in <sitescope dir>groups (in Sitescope 10 they should be correct): _doWorkWithConfigFilePersistency_current=true _doWorkWithConfigFilePersistency_next=CHECKED Change "_license", "_licenseOld" and "_licenseForX" values in master.config using a new valid license key. Open <sitescope dir>binPersistencyViewer.bat, select persistency folder under sitescope directory and then click open. Select… Read More »

    Written by 0 Comment
    Uncategorized
  • Integration between Sitescope and OMW

    To ensure that the service hierarchy is populated to OMW you have to apply server patch OMW_00016; this patch has been superseded by OMW_00048 and available in http://support.openview.hp.com/selfsolve/document/KM753892?searchIdentifier=d818bd7%3a1235068c088%3a-6e2&resultType=document&documentURL=KM753892&resultsURL=%2fselfsolve%2fpatches&allowReturn=true  The official steps are: Following are the steps used to solve this particular (SiteScope) problem: 1. Uninstall SiteScope Discovery policy from the node 2. ovc -stop agtrep… Read More »

    Written by 0 Comment